#!/bin/sh
# a u t o g e n . s h
#
# Copyright (c) 2005-2007 United States Government as represented by
# the U.S. Army Research Laboratory.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
#
# 3. The name of the author may not be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
###
#
# Script for automatically preparing the sources for compilation by
# performing the myrid of necessary steps. The script attempts to
# detect proper version support, and outputs warnings about particular
# systems that have autotool peculiarities.
#
# Basically, if everything is set up and installed correctly, the
# script will validate that minimum versions of the GNU Build System
# tools are installed, account for several common configuration
# issues, and then simply run autoreconf for you.
#
# If autoreconf fails, which can happen for many valid configurations,
# this script proceeds to run manual preparation steps effectively
# providing a POSIX shell script (mostly complete) reimplementation of
# autoreconf.
#
# The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER
# environment variables and corresponding _OPTIONS variables (e.g.
# AUTORECONF_OPTIONS) may be used to override the default automatic
# detection behaviors. Similarly the _VERSION variables will override
# the minimum required version numbers.
#
# Examples:
#
# To obtain help on usage:
# ./autogen.sh --help
#
# To obtain verbose output:
# ./autogen.sh --verbose
#
# To skip autoreconf and prepare manually:
# AUTORECONF=false ./autogen.sh
#
# To verbosely try running with an older (unsupported) autoconf:
# AUTOCONF_VERSION=2.50 ./autogen.sh --verbose
#
# Author: Christopher Sean Morrison <morrison@brlcad.org>
#
######################################################################
# set to minimum acceptible version of autoconf
if [ "x$AUTOCONF_VERSION" = "x" ] ; then
AUTOCONF_VERSION=2.52
fi
# set to minimum acceptible version of automake
if [ "x$AUTOMAKE_VERSION" = "x" ] ; then
AUTOMAKE_VERSION=1.6.0
fi
# set to minimum acceptible version of libtool
if [ "x$LIBTOOL_VERSION" = "x" ] ; then
LIBTOOL_VERSION=1.4.2
fi
##################
# ident function #
##################
ident ( ) {
# extract copyright from header
__copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`"
if [ "x$__copyright" = "x" ] ; then
__copyright="`date +%Y`"
fi
# extract version from CVS Id string
__id="$Id: autogen.sh,v 14.97 2007/06/18 22:25:02 brlcad Exp $"
__version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`"
if [ "x$__version" = "x" ] ; then
__version=""
fi
echo "autogen.sh build preparation script by Christopher Sean Morrison"
echo "revised 3-clause BSD-style license, copyright (c) $__copyright"
echo "script version $__version, ISO/IEC 9945 POSIX shell script"
}
##################
# USAGE FUNCTION #
##################
usage ( ) {
echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [--version]"
echo " --help Help on $NAME_OF_AUTOGEN usage"
echo " --verbose Verbose progress output"
echo " --quiet Quiet suppressed progress output"
echo " --version Only perform GNU Build System version checks"
echo
echo "Description: This script will validate that minimum versions of the"
echo "GNU Build System tools are installed and then run autoreconf for you."
echo "Should autoreconf fail, manual preparation steps will be run"
echo "potentially accounting for several common preparation issues. The"
echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER,"
echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS"
echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the"
echo "default automatic detection behavior."
echo
ident
return 0
}
##########################
# VERSION_ERROR FUNCTION #
##########################
version_error ( ) {
if [ "x$1" = "x" ] ; then
echo "INTERNAL ERROR: version_error was not provided a version"
exit 1
fi
if [ "x$2" = "x" ] ; then
echo "INTERNAL ERROR: version_error was not provided an application name"
exit 1
fi
$ECHO
$ECHO "ERROR: To prepare the ${PROJECT} build system from scratch,"
$ECHO " at least version $1 of $2 must be installed."
$ECHO
$ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will"
$ECHO "run configure or make. Either the GNU Autotools will need to be installed"
$ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source"
$ECHO "code on another system and then transferred to here. -- Cheers!"
$ECHO
}
##########################
# VERSION_CHECK FUNCTION #
##########################
version_check ( ) {
if [ "x$1" = "x" ] ; then
echo "INTERNAL ERROR: version_check was not provided a minimum version"
exit 1
fi
_min="$1"
if [ "x$2" = "x" ] ; then
echo "INTERNAL ERROR: version check was not provided a comparison version"
exit 1
fi
_cur="$2"
# needed to handle versions like 1.10 and 1.4-p6
_min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
_cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
_min_major="`echo $_min | cut -d. -f1`"
_min_minor="`echo $_min | cut -d. -f2`"
_min_patch="`echo $_min | cut -d. -f3`"
_cur_major="`echo $_cur | cut -d. -f1`"
_cur_minor="`echo $_cur | cut -d. -f2`"
_cur_patch="`echo $_cur | cut -d. -f3`"
if [ "x$_min_major" = "x" ] ; then
_min_major=0
fi
if [ "x$_min_minor" = "x" ] ; then
_min_minor=0
fi
if [ "x$_min_patch" = "x" ] ; then
_min_patch=0
fi
if [ "x$_cur_minor" = "x" ] ; then
_cur_major=0
fi
if [ "x$_cur_minor" = "x" ] ; then
_cur_minor=0
fi
if [ "x$_cur_patch" = "x" ] ; then
_cur_patch=0
fi
$VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}"
if [ $_min_major -lt $_cur_major ] ; then
return 0
elif [ $_min_major -eq $_cur_major ] ; then
if [ $_min_minor -lt $_cur_minor ] ; then
return 0
elif [ $_min_minor -eq $_cur_minor ] ; then
if [ $_min_patch -lt $_cur_patch ] ; then
return 0
elif [ $_min_patch -eq $_cur_patch ] ; then
return 0
fi
fi
fi
return 1
}
######################################
# LOCATE_CONFIGURE_TEMPLATE FUNCTION #
######################################
locate_configure_template ( ) {
_pwd="`pwd`"
if test -f "./configure.ac" ; then
echo "./configure.ac"
elif test -f "./configure.in" ; then
echo "./configure.in"
elif test -f "$_pwd/configure.ac" ; then
echo "$_pwd/configure.ac"
elif test -f "$_pwd/configure.in" ; then
echo "$_pwd/configure.in"
elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then
echo "$PATH_TO_AUTOGEN/configure.ac"
elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then
echo "$PATH_TO_AUTOGEN/configure.in"
fi
}
##################
# argument check #
##################
ARGS="$*"
PATH_TO_AUTOGEN="`dirname $0`"
NAME_OF_AUTOGEN="`basename $0`"
AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN"
LIBTOOL_M4="${PATH_TO_AUTOGEN}/misc/libtool.m4"
if [ "x$HELP" = "x" ] ; then
HELP=no
fi
if [ "x$QUIET" = "x" ] ; then
QUIET=no
fi
if [ "x$VERBOSE" = "x" ] ; then
VERBOSE=no
fi
if [ "x$VERSION_ONLY" = "x" ] ; then
VERSION_ONLY=no
fi
if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then
AUTORECONF_OPTIONS="-i -f"
fi
if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then
AUTOCONF_OPTIONS="-f"
fi
if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then
AUTOMAKE_OPTIONS="-a -c -f"
fi
ALT_AUTOMAKE_OPTIONS="-a -c"
if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then
LIBTOOLIZE_OPTIONS="--automake -c -f"
fi
ALT_LIBTOOLIZE_OPTIONS="--automake --copy --force"
if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then
ACLOCAL_OPTIONS=""
fi
if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then
AUTOHEADER_OPTIONS=""
fi
for arg in $ARGS ; do
case "x$arg" in
x--help) HELP=yes ;;
x-[hH]) HELP=yes ;;
x--quiet) QUIET=yes ;;
x-[qQ]) QUIET=yes ;;
x--verbose) VERBOSE=yes ;;
x-[vV]) VERBOSE=yes ;;
x--version) VERSION_ONLY=yes ;;
*)
echo "Unknown option: $arg"
echo
usage
exit 1
;;
esac
done
#####################
# environment check #
#####################
# sanity check before recursions potentially begin
if [ ! -f "$AUTOGEN_SH" ] ; then
echo "INTERNAL ERROR: $AUTOGEN_SH does not exist"
if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then
echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH"
fi
exit 1
fi
# force locale setting to C so things like date output as expected
LC_ALL=C
# commands that this script expects
for __cmd in echo head tail pwd ; do
echo "test" | $__cmd > /dev/null 2>&1
if [ $? != 0 ] ; then
echo "INTERNAL ERROR: '${__cmd}' command is required"
exit 2
fi
done
echo "test" | grep "test" > /dev/null 2>&1
if test ! x$? = x0 ; then
echo "INTERNAL ERROR: grep command is required"
exit 1
fi
echo "test" | sed "s/test/test/" > /dev/null 2>&1
if test ! x$? = x0 ; then
echo "INTERNAL ERROR: sed command is required"
exit 1
fi
# determine the behavior of echo
case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
*c*,-n*) ECHO_N= ECHO_C='
' ECHO_T=' ' ;;
*c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
*) ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac
# determine the behavior of head
case "x`echo 'head' | head -n 1 2>&1`" in
*xhead*) HEAD_N="n " ;;
*) HEAD_N="" ;;
esac
# determine the behavior of tail
case "x`echo 'tail' | tail -n 1 2>&1`" in
*xtail*) TAIL_N="n " ;;
*) TAIL_N="" ;;
esac
VERBOSE_ECHO=:
ECHO=:
if [ "x$QUIET" = "xyes" ] ; then
if [ "x$VERBOSE" = "xyes" ] ; then
echo "Verbose output quelled by quiet option. Further output disabled."
fi
else
ECHO=echo
if [ "x$VERBOSE" = "xyes" ] ; then
echo "Verbose output enabled"
VERBOSE_ECHO=echo
fi
fi
# allow a recursive run to disable further recursions
if [ "x$RUN_RECURSIVE" = "x" ] ; then
RUN_RECURSIVE=yes
fi
################################################
# check for help arg and bypass version checks #
################################################
if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then
HELP=yes
fi
if [ "x$HELP" = "xyes" ] ; then
usage
$ECHO "---"
$ECHO "Help was requested. No preparation or configuration will be performed."
exit 0
fi
#######################
# set up signal traps #
#######################
untrap_abnormal ( ) {
for sig in 1 2 13 15; do
trap - $sig
done
}
# do this cleanup whenever we exit.
trap '
# start from the root
if test -d "$START_PATH" ; then
cd "$START_PATH"
fi
# restore/delete backup files
if test "x$PFC_INIT" = "x1" ; then
recursive_restore
fi
' 0
# trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15)
for sig in 1 2 13 15; do
trap '
$ECHO ""
$ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'"
# start from the root
if test -d "$START_PATH" ; then
cd "$START_PATH"
fi
# clean up on abnormal exit
$VERBOSE_ECHO "rm -rf autom4te.cache"
rm -rf autom4te.cache
if test -f "acinclude.m4.$$.backup" ; then
$VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4"
chmod u+w acinclude.m4
cat acinclude.m4.$$.backup > acinclude.m4
$VERBOSE_ECHO "rm -f acinclude.m4.$$.backup"
rm -f acinclude.m4.$$.backup
fi
{ (exit 1); exit 1; }
' $sig
done
#############################
# look for a configure file #
#############################
if [ "x$CONFIGURE" = "x" ] ; then
CONFIGURE="`locate_configure_template`"
if [ ! "x$CONFIGURE" = "x" ] ; then
$VERBOSE_ECHO "Found a configure template: $CONFIGURE"
fi
else
$ECHO "Using CONFIGURE environment variable override: $CONFIGURE"
fi
if [ "x$CONFIGURE" = "x" ] ; then
if [ "x$VERSION_ONLY" = "xyes" ] ; then
CONFIGURE=/dev/null
else
$ECHO
$ECHO "A configure.ac or configure.in file could not be located implying"
$ECHO "that the GNU Build System is at least not used in this directory. In"
$ECHO "any case, there is nothing to do here without one of those files."
$ECHO
$ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
exit 1
fi
fi
####################
# get project name #
####################
if [ "x$PROJECT" = "x" ] ; then
PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
if [ "x$PROJECT" = "xAC_INIT" ] ; then
# projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead
PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
fi
if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then
PROJECT="project"
fi
if [ "x$PROJECT" = "x" ] ; then
PROJECT="project"
fi
else
$ECHO "Using PROJECT environment variable override: $PROJECT"
fi
$ECHO "Preparing the $PROJECT build system...please wait"
$ECHO
########################
# check for autoreconf #
########################
HAVE_AUTORECONF=no
if [ "x$AUTORECONF" = "x" ] ; then
for AUTORECONF in autoreconf ; do
$VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version"
$AUTORECONF --version > /dev/null 2>&1
if [ $? = 0 ] ; then
HAVE_AUTORECONF=yes
break
fi
done
else
HAVE_AUTORECONF=yes
$ECHO "Using AUTORECONF environment variable override: $AUTORECONF"
fi
##########################
# autoconf version check #
##########################
_acfound=no
if [ "x$AUTOCONF" = "x" ] ; then
for AUTOCONF in autoconf ; do
$VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version"
$AUTOCONF --version > /dev/null 2>&1
if [ $? = 0 ] ; then
_acfound=yes
break
fi
done
else
_acfound=yes
$ECHO "Using AUTOCONF environment variable override: $AUTOCONF"
fi
_report_error=no
if [ ! "x$_acfound" = "xyes" ] ; then
$ECHO "ERROR: Unable to locate GNU Autoconf."
_report_error=yes
else
_version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
if [ "x$_version" = "x" ] ; then
_version="0.0.0"
fi
$ECHO "Found GNU Autoconf version $_version"
version_check "$AUTOCONF_VERSION" "$_version"
if [ $? -ne 0 ] ; then
_report_error=yes
fi
fi
if [ "x$_report_error" = "xyes" ] ; then
version_error "$AUTOCONF_VERSION" "GNU Autoconf"
exit 1
fi
##########################
# automake version check #
##########################
_amfound=no
if [ "x$AUTOMAKE" = "x" ] ; then
for AUTOMAKE in automake ; do
$VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version"
$AUTOMAKE --version > /dev/null 2>&1
if [ $? = 0 ] ; then
_amfound=yes
break
fi
done
else
_amfound=yes
$ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE"
fi
_report_error=no
if [ ! "x$_amfound" = "xyes" ] ; then
$ECHO
$ECHO "ERROR: Unable to locate GNU Automake."
_report_error=yes
else
_version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
if [ "x$_version" = "x" ] ; then
_version="0.0.0"
fi
$ECHO "Found GNU Automake version $_version"
version_check "$AUTOMAKE_VERSION" "$_version"
if [ $? -ne 0 ] ; then
_report_error=yes
fi
fi
if [ "x$_report_error" = "xyes" ] ; then
version_error "$AUTOMAKE_VERSION" "GNU Automake"
exit 1
fi
########################
# check for libtoolize #
########################
HAVE_LIBTOOLIZE=yes
HAVE_ALT_LIBTOOLIZE=no
_ltfound=no
if [ "x$LIBTOOLIZE" = "x" ] ; then
LIBTOOLIZE=libtoolize
$VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version"
$LIBTOOLIZE --version > /dev/null 2>&1
if [ ! $? = 0 ] ; then
HAVE_LIBTOOLIZE=no
$ECHO
if [ "x$HAVE_AUTORECONF" = "xno" ] ; then
$ECHO "Warning: libtoolize does not appear to be available."
else
$ECHO "Warning: libtoolize does not appear to be available. This means that"
$ECHO "the automatic build preparation via autoreconf will probably not work."
$ECHO "Preparing the build by running each step individually, however, should"
$ECHO "work and will be done automatically for you if autoreconf fails."
fi
# look for some alternates
for tool in glibtoolize libtoolize15 libtoolize14 libtoolize13 ; do
$VERBOSE_ECHO "Checking libtoolize alternate: $tool --version"
_glibtoolize="`$tool --version > /dev/null 2>&1`"
if [ $? = 0 ] ; then
$VERBOSE_ECHO "Found $tool --version"
_glti="`which $tool`"
if [ "x$_glti" = "x" ] ; then
$VERBOSE_ECHO "Cannot find $tool with which"
continue;
fi
if test ! -f "$_glti" ; then
$VERBOSE_ECHO "Cannot use $tool, $_glti is not a file"
continue;
fi
_gltidir="`dirname $_glti`"
if [ "x$_gltidir" = "x" ] ; then
$VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti"
continue;
fi
if test ! -d "$_gltidir" ; then
$VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory"
continue;
fi
HAVE_ALT_LIBTOOLIZE=yes
LIBTOOLIZE="$tool"
$ECHO
$ECHO "Fortunately, $tool was found which means that your system may simply"
$ECHO "have a non-standard or incomplete GNU Autotools install. If you have"
$ECHO "sufficient system access, it may be possible to quell this warning by"
$ECHO "running:"
$ECHO
sudo -V > /dev/null 2>&1
if [ $? = 0 ] ; then
$ECHO " sudo ln -s $_glti $_gltidir/libtoolize"
$ECHO
else
$ECHO " ln -s $_glti $_gltidir/libtoolize"
$ECHO
$ECHO "Run that as root or with proper permissions to the $_gltidir directory"
$ECHO
fi
_ltfound=yes
break
fi
done
else
_ltfound=yes
fi
else
_ltfound=yes
$ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE"
fi
############################
# libtoolize version check #
############################
_report_error=no
if [ ! "x$_ltfound" = "xyes" ] ; then
$ECHO
$ECHO "ERROR: Unable to locate GNU Libtool."
_report_error=yes
else
_version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
if [ "x$_version" = "x" ] ; then
_version="0.0.0"
fi
$ECHO "Found GNU Libtool version $_version"
version_check "$LIBTOOL_VERSION" "$_version"
if [ $? -ne 0 ] ; then
_report_error=yes
fi
fi
if [ "x$_report_error" = "xyes" ] ; then
version_error "$LIBTOOL_VERSION" "GNU Libtool"
exit 1
fi
#####################
# check for aclocal #
#####################
if [ "x$ACLOCAL" = "x" ] ; then
for ACLOCAL in aclocal ; do
$VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version"
$ACLOCAL --version > /dev/null 2>&1
if [ $? = 0 ] ; then
break
fi
done
else
$ECHO "Using ACLOCAL environment variable override: $ACLOCAL"
fi
########################
# check for autoheader #
########################
if [ "x$AUTOHEADER" = "x" ] ; then
for AUTOHEADER in autoheader ; do
$VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version"
$AUTOHEADER --version > /dev/null 2>&1
if [ $? = 0 ] ; then
break
fi
done
else
$ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER"
fi
#########################
# check if version only #
#########################
$VERBOSE_ECHO "Checking whether to only output version information"
if [ "x$VERSION_ONLY" = "xyes" ] ; then
$ECHO
ident
$ECHO "---"
$ECHO "Version requested. No preparation or configuration will be performed."
exit 0
fi
#################################
# PROTECT_FROM_CLOBBER FUNCTION #
#################################
protect_from_clobber ( ) {
PFC_INIT=1
# protect COPYING & INSTALL from overwrite by automake. the
# automake force option will (inappropriately) ignore the existing
# contents of a COPYING and/or INSTALL files (depending on the
# version) instead of just forcing *missing* files like it does
# for AUTHORS, NEWS, and README. this is broken but extremely
# prevalent behavior, so we protect against it by keeping a backup
# of the file that can later be restored.
if test -f COPYING ; then
if test -f COPYING.$$.protect_from_automake.backup ; then
$VERBOSE_ECHO "Already backed up COPYING in `pwd`"
else
$VERBOSE_ECHO "Backing up COPYING in `pwd`"
$VERBOSE_ECHO "cp -p COPYING COPYING.$$.protect_from_automake.backup"
cp -p COPYING COPYING.$$.protect_from_automake.backup
fi
fi
if test -f INSTALL ; then
if test -f INSTALL.$$.protect_from_automake.backup ; then
$VERBOSE_ECHO "Already backed up INSTALL in `pwd`"
else
$VERBOSE_ECHO "Backing up INSTALL in `pwd`"
$VERBOSE_ECHO "cp -p INSTALL INSTALL.$$.protect_from_automake.backup"
cp -p INSTALL INSTALL.$$.protect_from_automake.backup
fi
fi
}
##############################
# RECURSIVE_PROTECT FUNCTION #
##############################
recursive_protect ( ) {
# for projects using recursive configure, run the build
# preparation steps for the subdirectories. this function assumes
# START_PATH was set to pwd before recursion begins so that
# relative paths work.
# git 'r done, protect COPYING and INSTALL from being clobbered
protect_from_clobber
if test -d autom4te.cache ; then
$VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
$VERBOSE_ECHO "rm -rf autom4te.cache"
rm -rf autom4te.cache
fi
# find configure template
_configure="`locate_configure_template`"
if [ "x$_configure" = "x" ] ; then
return
fi
# $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure"
# look for subdirs
# $VERBOSE_ECHO "Looking for subdirs in `pwd`"
_det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
CHECK_DIRS=""
for dir in $_det_config_subdirs ; do
if test -d "`pwd`/$dir" ; then
CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
fi
done
# process subdirs
if [ ! "x$CHECK_DIRS" = "x" ] ; then
$VERBOSE_ECHO "Recursively scanning the following directories:"
$VERBOSE_ECHO " $CHECK_DIRS"
for dir in $CHECK_DIRS ; do
$VERBOSE_ECHO "Protecting files from automake in $dir"
cd "$START_PATH"
eval "cd $dir"
# recursively git 'r done
recursive_protect
done
fi
} # end of recursive_protect
#############################
# RESTORE_CLOBBERED FUNCION #
#############################
restore_clobbered ( ) {
# The automake (and autoreconf by extension) -f/--force-missing
# option may overwrite COPYING and INSTALL even if they do exist.
# Here we restore the files if necessary.
spacer=no
# COPYING
if test -f COPYING.$$.protect_from_automake.backup ; then
if test -f COPYING ; then
# compare entire content, restore if needed
if test "x`cat COPYING`" != "x`cat COPYING.$$.protect_from_automake.backup`" ; then
if test "x$spacer" = "xno" ; then
$VERBOSE_ECHO
spacer=yes
fi
# restore the backup
$VERBOSE_ECHO "Restoring COPYING from backup (automake -f likely clobbered it)"
$VERBOSE_ECHO "rm -f COPYING"
rm -f COPYING
$VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING"
mv COPYING.$$.protect_from_automake.backup COPYING
fi # check contents
elif test -f COPYING.$$.protect_from_automake.backup ; then
$VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING"
mv COPYING.$$.protect_from_automake.backup COPYING
fi # -f COPYING
# just in case
$VERBOSE_ECHO "rm -f COPYING.$$.protect_from_automake.backup"
rm -f COPYING.$$.protect_from_automake.backup
fi # -f COPYING.$$.protect_from_automake.backup
# INSTALL
if test -f INSTALL.$$.protect_from_automake.backup ; then
if test -f INSTALL ; then
# compare entire content, restore if needed
if test "x`cat INSTALL`" != "x`cat INSTALL.$$.protect_from_automake.backup`" ; then
if test "x$spacer" = "xno" ; then
$VERBOSE_ECHO
spacer=yes
fi
# restore the backup
$VERBOSE_ECHO "Restoring INSTALL from backup (automake -f likely clobbered it)"
$VERBOSE_ECHO "rm -f INSTALL"
rm -f INSTALL
$VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL"
mv INSTALL.$$.protect_from_automake.backup INSTALL
fi # check contents
elif test -f INSTALL.$$.protect_from_automake.backup ; then
$VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL"
mv INSTALL.$$.protect_from_automake.backup INSTALL
fi # -f INSTALL
# just in case
$VERBOSE_ECHO "rm -f INSTALL.$$.protect_from_automake.backup"
rm -f INSTALL.$$.protect_from_automake.backup
fi # -f INSTALL.$$.protect_from_automake.backup
CONFIGURE="`locate_configure_template`"
if [ "x$CONFIGURE" = "x" ] ; then
return
fi
_aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
if test ! -d "$_aux_dir" ; then
_aux_dir=.
fi
for file in config.guess config.sub ltmain.sh ; do
if test -f "${_aux_dir}/${file}" ; then
$VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\""
rm -f "${_aux_dir}/${file}.backup"
fi
done
} # end of restore_clobbered
##############################
# RECURSIVE_RESTORE FUNCTION #
##############################
recursive_restore ( ) {
# restore COPYING and INSTALL from backup if they were clobbered
# for each directory recursively.
# git 'r undone
restore_clobbered
# find configure template
_configure="`locate_configure_template`"
if [ "x$_configure" = "x" ] ; then
return
fi
# look for subdirs
_det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
CHECK_DIRS=""
for dir in $_det_config_subdirs ; do
if test -d "`pwd`/$dir" ; then
CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
fi
done
# process subdirs
if [ ! "x$CHECK_DIRS" = "x" ] ; then
$VERBOSE_ECHO "Recursively scanning the following directories:"
$VERBOSE_ECHO " $CHECK_DIRS"
for dir in $CHECK_DIRS ; do
$VERBOSE_ECHO "Checking files for automake damage in $dir"
cd "$START_PATH"
eval "cd $dir"
# recursively git 'r undone
recursive_restore
done
fi
} # end of recursive_restore
#######################
# INITIALIZE FUNCTION #
#######################
initialize ( ) {
# this routine performs a variety of directory-specific
# initializations. some are sanity checks, some are preventive,
# and some are necessary setup detection.
#
# this function sets:
# CONFIGURE
# SEARCH_DIRS
# CONFIG_SUBDIRS
##################################
# check for a configure template #
##################################
CONFIGURE="`locate_configure_template`"
if [ "x$CONFIGURE" = "x" ] ; then
$ECHO
$ECHO "A configure.ac or configure.in file could not be located implying"
$ECHO "that the GNU Build System is at least not used in this directory. In"
$ECHO "any case, there is nothing to do here without one of those files."
$ECHO
$ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
exit 1
fi
#####################
# detect an aux dir #
#####################
_aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
if test ! -d "$_aux_dir" ; then
_aux_dir=.
else
$VERBOSE_ECHO "Detected auxillary directory: $_aux_dir"
fi
################################
# detect a recursive configure #
################################
CONFIG_SUBDIRS=""
_det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
for dir in $_det_config_subdirs ; do
if test -d "`pwd`/$dir" ; then
$VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir"
CONFIG_SUBDIRS="$CONFIG_SUBDIRS `pwd`/$dir"
fi
done
##########################################
# make sure certain required files exist #
##########################################
for file in AUTHORS COPYING ChangeLog INSTALL NEWS README ; do
if test ! -f $file ; then
$VERBOSE_ECHO "Touching ${file} since it does not exist"
touch $file
fi
done
##################################################
# make sure certain generated files do not exist #
##################################################
for file in config.guess config.sub ltmain.sh ; do
if test -f "${_aux_dir}/${file}" ; then
$VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\""
mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup"
fi
done
############################
# search alternate m4 dirs #
############################
SEARCH_DIRS=""
for dir in m4 ; do
if [ -d $dir ] ; then
$VERBOSE_ECHO "Found extra aclocal search directory: $dir"
SEARCH_DIRS="$SEARCH_DIRS -I $dir"
fi
done
######################################
# remove any previous build products #
######################################
if test -d autom4te.cache ; then
$VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
$VERBOSE_ECHO "rm -rf autom4te.cache"
rm -rf autom4te.cache
fi
# tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it
# if test -f aclocal.m4 ; then
# $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it"
# $VERBOSE_ECHO "rm -f aclocal.m4"
# rm -f aclocal.m4
# fi
} # end of initialize()
##############
# initialize #
##############
# stash path
START_PATH="`pwd`"
# Before running autoreconf or manual steps, some prep detection work
# is necessary or useful. Only needs to occur once per directory, but
# does need to traverse the entire subconfigure hierarchy to protect
# files from being clobbered even by autoreconf.
recursive_protect
# start from where we started
cd "$START_PATH"
# get ready to process
initialize
############################################
# prepare build via autoreconf or manually #
############################################
reconfigure_manually=no
if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then
$ECHO
$ECHO $ECHO_N "Automatically preparing build ... $ECHO_C"
$VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS"
autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`"
ret=$?
$VERBOSE_ECHO "$autoreconf_output"
if [ ! $ret = 0 ] ; then
if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then
$ECHO
$ECHO "Warning: autoreconf failed but due to what is usually a common libtool"
$ECHO "misconfiguration issue. This problem is encountered on systems that"
$ECHO "have installed libtoolize under a different name without providing a"
$ECHO "symbolic link or without setting the LIBTOOLIZE environment variable."
$ECHO
$ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE"
export LIBTOOLIZE
RUN_RECURSIVE=no
export RUN_RECURSIVE
untrap_abnormal
$VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
exit $?
fi
fi
$ECHO "Warning: $AUTORECONF failed"
if test -f ltmain.sh ; then
$ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should"
fi
$ECHO "Attempting to run the preparation steps individually"
reconfigure_manually=yes
fi
else
reconfigure_manually=yes
fi
############################
# LIBTOOL_FAILURE FUNCTION #
############################
libtool_failure ( ) {
# libtool is rather error-prone in comparison to the other
# autotools and this routine attempts to compensate for some
# common failures. the output after a libtoolize failure is
# parsed for an error related to AC_PROG_LIBTOOL and if found, we
# attempt to inject a project-provided libtool.m4 file.
_autoconf_output="$1"
if [ "x$RUN_RECURSIVE" = "xno" ] ; then
# we already tried the libtool.m4, don't try again
return 1
fi
if test -f "$LIBTOOL_M4" ; then
found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`"
if test ! "x$found_libtool" = "x" ; then
if test -f acinclude.m4 ; then
rm -f acinclude.m4.$$.backup
$VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup"
cat acinclude.m4 > acinclude.m4.$$.backup
fi
$VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4"
chmod u+w acinclude.m4
cat "$LIBTOOL_M4" >> acinclude.m4
# don't keep doing this
RUN_RECURSIVE=no
export RUN_RECURSIVE
untrap_abnormal
$ECHO
$ECHO "Restarting the preparation steps with libtool macros in acinclude.m4"
$VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
exit $?
fi
fi
}
###########################
# MANUAL_AUTOGEN FUNCTION #
###########################
manual_autogen ( ) {
##################################################
# Manual preparation steps taken are as follows: #
# aclocal [-I m4] #
# libtoolize --automake -c -f #
# aclocal [-I m4] #
# autoconf -f #
# autoheader #
# automake -a -c -f #
##################################################
###########
# aclocal #
###########
$VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
ret=$?
$VERBOSE_ECHO "$aclocal_output"
if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi
##############
# libtoolize #
##############
need_libtoolize=no
for feature in AC_PROG_LIBTOOL LT_INIT ; do
$VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
found="`grep \"^$feature.*\" $CONFIGURE`"
if [ ! "x$found" = "x" ] ; then
need_libtoolize=yes
break
fi
done
if [ "x$need_libtoolize" = "xyes" ] ; then
if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then
$VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS"
libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`"
ret=$?
$VERBOSE_ECHO "$libtoolize_output"
if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
else
if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
$VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS"
libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`"
ret=$?
$VERBOSE_ECHO "$libtoolize_output"
if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
fi
fi
###########
# aclocal #
###########
# re-run again as instructed by libtoolize
$VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
ret=$?
$VERBOSE_ECHO "$aclocal_output"
# libtoolize might put ltmain.sh in the wrong place
if test -f ltmain.sh ; then
if test ! -f "${_aux_dir}/ltmain.sh" ; then
$ECHO
$ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory"
$ECHO
$ECHO "Fortunately, the problem can be worked around by simply copying the"
$ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you."
$ECHO
$VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\""
cp -p ltmain.sh "${_aux_dir}/ltmain.sh"
$ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
fi
fi # ltmain.sh
fi # need_libtoolize
############
# autoconf #
############
$VERBOSE_ECHO
$VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS"
autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`"
ret=$?
$VERBOSE_ECHO "$autoconf_output"
if [ ! $ret = 0 ] ; then
# retry without the -f and check for usage of macros that are too new
ac2_59_macros="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE"
ac2_55_macros="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE"
ac2_54_macros="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T"
macros_to_search=""
ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`"
ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`"
if [ $ac_major -lt 2 ] ; then
macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
else
if [ $ac_minor -lt 54 ] ; then
macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
elif [ $ac_minor -lt 55 ] ; then
macros_to_search="$ac2_59_macros $ac2_55_macros"
elif [ $ac_minor -lt 59 ] ; then
macros_to_search="$ac2_59_macros"
fi
fi
configure_ac_macros=__none__
for feature in $macros_to_search ; do
$VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
found="`grep \"^$feature.*\" $CONFIGURE`"
if [ ! "x$found" = "x" ] ; then
if [ "x$configure_ac_macros" = "x__none__" ] ; then
configure_ac_macros="$feature"
else
configure_ac_macros="$feature $configure_ac_macros"
fi
fi
done
if [ ! "x$configure_ac_macros" = "x__none__" ] ; then
$ECHO
$ECHO "Warning: Unsupported macros were found in $CONFIGURE"
$ECHO
$ECHO "The `echo $CONFIGURE | basename` file was scanned in order to determine if any"
$ECHO "unsupported macros are used that exceed the minimum version"
$ECHO "settings specified within this file. As such, the following macros"
$ECHO "should be removed from configure.ac or the version numbers in this"
$ECHO "file should be increased:"
$ECHO
$ECHO "$configure_ac_macros"
$ECHO
$ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C"
fi
###################
# autoconf, retry #
###################
$VERBOSE_ECHO
$VERBOSE_ECHO "$AUTOCONF"
autoconf_output="`$AUTOCONF 2>&1`"
ret=$?
$VERBOSE_ECHO "$autoconf_output"
if [ ! $ret = 0 ] ; then
# test if libtool is busted
libtool_failure "$autoconf_output"
# let the user know what went wrong
cat <<EOF
$autoconf_output
EOF
$ECHO "ERROR: $AUTOCONF failed"
exit 2
else
# autoconf sans -f and possibly sans unsupported options succeed so warn verbosely
$ECHO
$ECHO "Warning: autoconf seems to have succeeded by removing the following options:"
$ECHO " AUTOCONF_OPTIONS=\"$AUTOCONF_OPTIONS\""
$ECHO
$ECHO "Removing those options should not be necessary and indicate some other"
$ECHO "problem with the build system. The build preparation is highly suspect"
$ECHO "and may result in configuration or compilation errors. Consider"
if [ "x$VERBOSE_ECHO" = "x:" ] ; then
$ECHO "rerunning the build preparation with verbose output enabled."
$ECHO " $AUTOGEN_SH --verbose"
else
$ECHO "reviewing the minimum GNU Autotools version settings contained in"
$ECHO "this script along with the macros being used in your `echo $CONFIGURE | basename` file."
fi
$ECHO
$ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
fi # autoconf ret = 0
fi # autoconf ret = 0
##############
# autoheader #
##############
need_autoheader=no
for feature in AM_CONFIG_HEADER AC_CONFIG_HEADER ; do
$VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
found="`grep \"^$feature.*\" $CONFIGURE`"
if [ ! "x$found" = "x" ] ; then
need_autoheader=yes
break
fi
done
if [ "x$need_autoheader" = "xyes" ] ; then
$VERBOSE_ECHO "$AUTOHEADER $AUTOHEADER_OPTIONS"
autoheader_output="`$AUTOHEADER $AUTOHEADER_OPTIONS 2>&1`"
ret=$?
$VERBOSE_ECHO "$autoheader_output"
if [ ! $ret = 0 ] ; then $ECHO "ERROR: $AUTOHEADER failed" && exit 2 ; fi
fi # need_autoheader
############
# automake #
############
need_automake=no
for feature in AM_INIT_AUTOMAKE ; do
$VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
found="`grep \"^$feature.*\" $CONFIGURE`"
if [ ! "x$found" = "x" ] ; then
need_automake=yes
break
fi
done
if [ "x$need_automake" = "xyes" ] ; then
$VERBOSE_ECHO "$AUTOMAKE $AUTOMAKE_OPTIONS"
automake_output="`$AUTOMAKE $AUTOMAKE_OPTIONS 2>&1`"
ret=$?
$VERBOSE_ECHO "$automake_output"
if [ ! $ret = 0 ] ; then
###################
# automake, retry #
###################
$VERBOSE_ECHO
$VERBOSE_ECHO "$AUTOMAKE $ALT_AUTOMAKE_OPTIONS"
# retry without the -f
automake_output="`$AUTOMAKE $ALT_AUTOMAKE_OPTIONS 2>&1`"
ret=$?
$VERBOSE_ECHO "$automake_output"
if [ ! $ret = 0 ] ; then
# test if libtool is busted
libtool_failure "$automake_output"
# let the user know what went wrong
cat <<EOF
$automake_output
EOF
$ECHO "ERROR: $AUTOMAKE failed"
exit 2
fi # automake retry
fi # automake ret = 0
fi # need_automake
} # end of manual_autogen
#####################################
# RECURSIVE_MANUAL_AUTOGEN FUNCTION #
#####################################
recursive_manual_autogen ( ) {
# run the build preparation steps manually for this directory
manual_autogen
# for projects using recursive configure, run the build
# preparation steps for the subdirectories.
if [ ! "x$CONFIG_SUBDIRS" = "x" ] ; then
$VERBOSE_ECHO "Recursively configuring the following directories:"
$VERBOSE_ECHO " $CONFIG_SUBDIRS"
for dir in $CONFIG_SUBDIRS ; do
$VERBOSE_ECHO "Processing recursive configure in $dir"
cd "$START_PATH"
cd "$dir"
# new directory, prepare
initialize
# run manual steps for the subdir and any others below
recursive_manual_autogen
done
fi
}
################################
# run manual preparation steps #
################################
if [ "x$reconfigure_manually" = "xyes" ] ; then
$ECHO
$ECHO $ECHO_N "Preparing build ... $ECHO_C"
recursive_manual_autogen
fi
#########################
# restore and summarize #
#########################
cd "$START_PATH"
# restore COPYING and INSTALL from backup if necessary
recursive_restore
# make sure we end up with a configure script
config_ac="`locate_configure_template`"
config="`echo $config_ac | sed 's/\.ac$//' | sed 's/\.in$//'`"
if [ "x$config" = "x" ] ; then
$VERBOSE_ECHO "Could not locate the configure template (from `pwd`)"
fi
# summarize
$ECHO "done"
$ECHO
if test "x$config" = "x" -o ! -f "$config" ; then
$ECHO "WARNING: The $PROJECT build system should now be prepared but there"
$ECHO "does not seem to be a resulting configure file. This is unexpected"
$ECHO "and likely the result of an error. You should run $NAME_OF_AUTOGEN"
$ECHO "with the --verbose option to get more details on a potential"
$ECHO "misconfiguration."
else
$ECHO "The $PROJECT build system is now prepared. To build here, run:"
$ECHO " $config"
$ECHO " make"
fi
# Local Variables:
# mode: sh
# tab-width: 8
# sh-basic-offset: 4
# sh-indentation: 4
# indent-tabs-mode: t
# End:
# ex: shiftwidth=4 tabstop=8
root